[WARC] contact 145.67 from k0ny

[Leslie Hittner]

I tried the connection tonight and was successful with
relatively low power using my 6 db omni antenna at 30 feet. The
Rochester node signal strength was good (full quieting, I
believe).

I can commit a rig and tnc as a digipeater full time on that
frequency if I add another dedicated antenna (The one I used
tonight is my APRS antenna.) I will also have to purchase
another two meter rig. Actually, I would like two more. Anyone
have two good used ones to sell (not handhelds)? I already have
a tnc waiting for a use.

-Les


----- Original Message ----- 
From: "Clare Jarvis" <clarej at hbci.com>
To: "Winona Amateur Radio Club general discussion"
<warc at lists.w0ne.org>
Sent: Wednesday, June 04, 2008 21:45
Subject: [WARC] contact 145.67 from k0ny


> Hi Les,
>
> I was not able to contact MNROCH from my ordinary packet
station.   So I
> though I would try the beam and a little heat.   (160 W).
Unfornutately the
> sound card software is configure in such a way that it seems
to transmit on
> the right channel and listen on the left channel thus making
connections
> impossible.   If you get a chance can you see if you can
connect MNROCH on
> 145.67  MHz?
>
> 73 Clare
> _______________________________________________
> WARC mailing list
> WARC at lists.w0ne.org
> http://lists.w0ne.org/cgi-bin/mailman/listinfo/warc


----------------------------------------------------------------
----------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 269.24.6/1482 - Release Date:
6/4/2008 7:10 AM